Task 04: BIOS and iDRAC Settings Validation
DOCUMENT CATEGORY: Runbook
SCOPE: Azure Local hardware provisioning
PURPOSE: Verify BIOS and iDRAC settings meet Azure Local validated baseline requirements and identify non-compliant settings for Task 05 remediation
MASTER REFERENCE: Phase 01: Hardware Provisioning
Status: Active
Overview
Validate current BIOS and iDRAC settings against the Dell Azure Local validated baseline and Azure Local Cloud enterprise operational standards using configuration data collected in Task 02. Generates a per-node compliance report identifying any settings that require remediation in Task 05.
The toolkit script reads the Task 02 discovery JSON files — no live iDRAC connection is required for script-based validation. The Dell iDRAC UI option requires direct access to each node's iDRAC interface.
Prerequisites
| Requirement | Description | Source |
|---|---|---|
| Task 02 Complete | BIOS and iDRAC configuration collected in configs/network-devices/bmc/<service-tag>.json | Task 02 hardware discovery |
| iDRAC Access (UI only) | iDRAC web interface reachable (UI tab only) | infrastructure.yml: nodes[].bmc.ip_address |
| Dell Documentation | Azure Local Validated Node Configuration Guide | Dell Support |
Values from infrastructure.yml
The values for this task come from infrastructure.yml (schema 5). Every key, with its type, default and example, is in the variables reference.
Required BIOS Settings
Core Virtualization Settings (All AX Platforms)
| Setting | Required Value | Purpose |
|---|---|---|
| SR-IOV Global Enable | Enabled | Network virtualization |
| Virtualization Technology (VT-x) | Enabled | Hyper-V support |
| VT for Directed I/O (VT-d / x2APIC Mode) | Enabled | DMA protection |
| Logical Processor (Hyperthreading) | Enabled | Performance |
Boot and Security Settings (All AX Platforms)
| Setting | Required Value | Purpose |
|---|---|---|
| Boot Mode | UEFI | Modern boot support |
| Secure Boot | Enabled | Security requirement |
| TPM Security | On | BitLocker, Credential Guard |
| System Profile | Performance | Maximum performance |
| AC Power Recovery | On | Auto-restart after power loss |
| AC Power Recovery Delay | Random | Staggered startup |
Enhanced Security Settings (AX-650, AX-760, AX-4510c, AX-4520c)
| Setting | Required Value | Purpose |
|---|---|---|
| Kernel DMA Protection | Enabled | DMA attack protection |
| TPM PPI Bypass Provision | Enabled | Automated TPM provisioning |
| TPM PPI Bypass Clear | Enabled | Automated TPM operations |
| TPM2 Algorithm Selection | SHA256 | Modern crypto algorithm |
| Intel TXT/AMD DRTM | On | Trusted execution |
Advanced Security Settings (AX-760, AX-4510c, AX-4520c)
| Setting | Required Value | Purpose |
|---|---|---|
| SMM Security Mitigation | Enabled | SMM protection |
Required iDRAC Settings
| Setting | Required Value | Purpose |
|---|---|---|
| Network: NIC Selection | Dedicated | Dedicated management port |
| Network: Enable NIC | Enabled | Management connectivity |
| IPMI Over LAN | Not Required | Azure Local uses Azure Arc |
| Power: Redundancy Policy | Input Power Redundant | Power protection |
| Power: Enable Hot Spare | Disabled¹ | Enterprise load-balanced |
| Power: Primary PSU | PSU1 | Primary power source |
| Session Timeout | 1800 seconds (30 min) | Security |
| Redfish API | Enabled | Remote management |
¹ Enterprise vs Dell Default:
- Dell Recommendation: Hot Spare
Enabled(one PSU standby, one active) - Enterprise Standard: Hot Spare
Disabled(both PSUs active, load-balanced) - Reason: Enterprise environments prefer both PSUs sharing load evenly for optimal power distribution and thermal management
Execution Options
- Dell iDRAC UI
- Orchestrated Script
For each node, validate BIOS and iDRAC settings directly via the iDRAC web interface.
BIOS Validation
- Navigate to
https://<idrac-ip>and log in with iDRAC credentials - Go to Configuration → BIOS Settings
- Verify settings against the required values in the tables above
Core Settings (all platforms):
- SR-IOV Global Enable:
Enabled - Virtualization Technology (VT-x):
Enabled - VT for Directed I/O (x2APIC Mode):
Enabled - Logical Processor (Hyperthreading):
Enabled - Boot Mode:
UEFI - Secure Boot:
Enabled - TPM Security:
On - System Profile:
Performance - AC Power Recovery:
On - AC Power Recovery Delay:
Random
Enhanced Security (AX-650 and later):
- Kernel DMA Protection:
Enabled - TPM PPI Bypass Provision:
Enabled - TPM PPI Bypass Clear:
Enabled - TPM2 Algorithm Selection:
SHA256 - Intel TXT/AMD DRTM:
On
Advanced Security (AX-760 and later):
- SMM Security Mitigation:
Enabled
iDRAC Validation
Navigate to iDRAC Settings and verify:
- Network: NIC Selection:
Dedicated - Network: Enable NIC:
Enabled - Power: Redundancy Policy:
Input Power Redundant - Power: Enable Hot Spare:
Disabled - Power: Primary Power Supply Unit:
PSU1 - Services: Web Server Session Timeout:
≤1800seconds - Services: Redfish:
Enabled - Services: NTP: Configured and synchronized
Document any non-compliant settings for remediation in Task 05.
PowerShell
When to use: Run the task with the script below, from the place its help names (a management workstation, or the node itself).
Script
| Script | What it does |
|---|---|
scripts/deploy/04-cluster-deployment/phase-01-hardware-provisioning/task-04-bios-and-idrac-settings-validation/powershell/Test-BiosIdracSettings.ps1 | Validates BIOS and iDRAC settings against desired configuration baseline. |
The BMC login comes from hardware.bmc (a node's nodes[].bmc wins) in infrastructure.yml. The password is a secret reference. -Credential overrides it. The script never prompts: without either, it stops with exit code 2.
Requires: PowerShell 7.
Run
.\Test-BiosIdracSettings.ps1 -InfrastructureFile .\infrastructure.yml
Example Compliance Report Output
{
"ServiceTag": "8T6GDB4",
"TotalChecks": 24,
"PassedChecks": 20,
"FailedChecks": 4,
"Status": "FAIL",
"FailedSettings": [
{
"Setting": "PowerRedundancy",
"Expected": "InputPowerRedundant",
"Actual": "NoRedundancy",
"Category": "iDRAC"
},
{
"Setting": "HotSpare",
"Expected": "Disabled",
"Actual": "Enabled",
"Category": "iDRAC"
}
]
}
Validation Checklist
- BIOS settings validated for all nodes
- iDRAC settings validated for all nodes
- Compliance report generated with per-node PASS/FAIL status
- Non-compliant settings identified and documented
- All nodes PASS — OR — remediation list created for Task 05
Troubleshooting
| Issue | Cause | Resolution |
|---|---|---|
| Inventory JSON not found | Task 02 not complete | Run Task 02 hardware discovery first |
| Null/empty BIOS values | Dell factory defaults not yet applied | Expected — Task 05 remediation will configure |
| Power settings show FAIL | Not configured from factory | Expected — Task 05 will apply correct settings |
| Platform not detected | Missing model info in JSON | Verify Task 02 collected full inventory |
| iDRAC unreachable (UI only) | Network connectivity | Verify iDRAC IP assignment from Task 01 |
Alternatives
The procedures in this task use the methods shown in the tabs above. The toolkit is PowerShell 7 only and has no Bash scripts. A few tasks that act on Azure also have an Azure CLI script written in PowerShell. The script status page of the toolkit lists which task has which script.
Navigation
| ← Task 03: Management NIC Reservations | ↑ Phase 01: Hardware Provisioning | Task 05: BIOS/iDRAC Remediation → |
Version Control
| Version | Date | Author | Changes |
|---|---|---|---|
| 1.0 | 2026-01-31 | Azure Local Cloud | Initial document |
| 1.1 | 2026-03-04 | Azure Local Cloud | Fix tab labels, script paths, input/output paths, Step→Task references, standards alignment |